RMRC Anaconda Airplane Kit

RMRC Anaconda Airplane Kit
There is a Flat rate shipping fee of $30.00
The Anaconda features a twin boom, inverted-V tail pusher design, with FPV flying and amateur aerial photography being its main purpose. It has been described as a “pilot’s air frame”, meaning that while it maintains excellent stall characteristics, it does not self correct while in a turn. When paired with the Vector OSD and stabilizer, this is the ultimate combination. 

We pulled out all of the stops with the Anaconda to make sure to offer the quality product that you have come to expect from RMRC. It was our main objective from the start to offer you the best product possible. From the high quality hardware and control horns, the ultra smooth foam with minimal mold flashing, and graphics designed by the artist known as Chicken Sashimi, we know you will be proud to fly this new air frame. 

THIS ITEM REQUIRES A FLAT RATE SHIPPING FEE of $30.00

Features:

• Easy to tear down for travel!
• Modular nose camera bay (We can supply drawings for others to make camera pods!)
• Adjustable center of gravity tray (no need to move batteries themselves)
• Ample room in the fuselage for equipment with easy access to all areas.
• Allows for a gimbal to be mounted under the nose for a clear view
• Optional flaps – Both leading and trailing edge for stable slow flight performance (hardware and servos not included for flaps)
• Strong landing gear with steerable nose wheel
• Optional mounting positions for GPS and/or transmitter on tail booms
• Premium custom RMRC branded Tiger Motor and ESC included with PNP version

Specifications:

• Wingspan: 2,060mm​
• Wing Area: Approx. 4900cm^​2
• Length: 1,410mm
• Motor: 35-48 800-1000kv Brushless outrunner 
• ​Propeller (sold separately): Recommend: 15x4E. Also can use 14×5.5MR, or similar.
• ESC:  60-80A ESC with switch mode BEC
• Servos: Recommended below 3x 27-34g and 2x 17-20g Metal Gear Digital (m
• Recommended Flap servos: HS-81/HS-85
• Battery: Li-Po 4s 5,000mAH – 20,000mAH (Additional nose weight needed with smaller batteries)
• ​Center of Gravity: 1/3 of wing from leading edge at the main spar
• Approximate flight duration: 45 minutes to over an hour depending on configuration
• Fuselage dimensions (Inside): L 66cm (26.5″) x  W 15cm (6″) x H 8cm (3″) Maximum measurements​